Free Noise Reducer: Remove Background Noise From Audio

Published By Veena Studio

Most noise reducers make you choose between a clean recording and a voice that still sounds like you. To remove background noise from audio in Veena, you pick a preset made for the noise you have, set one level just above the hiss between your words, and hear the take before and after with one knob, free, in your browser. Then the clean take becomes the start of a song: CoProducer, Veena's personal music producer, builds the rest around it.

Veena is an AI DAW with a personal music producer built in. Describe the song you want and CoProducer builds it with you — beats, chords, melody, arrangement and mix — as real tracks you can edit, mix and export. Free, in your browser.

How to remove background noise from audio, step by step

  1. Open daw.veena.studio and sign in with Google. A new project opens in the browser.
  2. Bring in the recording. Drag it onto the timeline or press Upload: a WAV, an MP3, an iPhone voice memo in M4A, a FLAC or an AIFF. Or record straight into Veena with the online voice recorder.
  3. Open the track's FX. Press FX on the track and add Noise Removal from the Stock FX list. It works on the track, so each recording gets its own setting.
  4. Pick a preset. Gentle Hiss, Room Tone, Noisy Preamp, Heavy Hiss or Safety Net, from the table below.
  5. Set Noise Floor. Loop a quiet gap between phrases and raise Noise Floor, the knob marked Floor, until it sits just above the hiss you hear there. Too high and the ends of words go with the noise.
  6. Compare. Turn Amount to 0 to hear the untouched take, then back to 100. Fine-tune Reduction for how far the noise drops and Release for how quickly the cleanup closes in after a word.
  7. Export. A 24-bit/48 kHz WAV or a 320 kbps MP3, with no watermark.

Or say it in one sentence: "take the hiss off my vocal without dulling it and cut the rumble". CoProducer adds and tunes the same Noise Removal and EQ cards on your track, and you can open every card afterwards.

Which preset for which noise

The noise you hearStart withWhat the preset does
A soft, steady hiss under a good recordingGentle HissLight cleanup, 12 dB of reduction, a slow release that keeps breaths
The hum of a room: a fan, a fridge, air conditioningRoom ToneA higher Noise Floor and 18 dB of reduction
The hiss of a cheap mic or an interface turned up highNoisy Preamp24 dB of reduction with a faster release
Loud, constant hiss on a phone or laptop recordingHeavy HissThe strongest preset, 30 dB of reduction
A clean take you just want a little quieter in the gapsSafety NetHalf the Amount and a low Noise Floor, a light touch

Every preset is a starting point. Each one only sets the four knobs, so once you hear the difference, move Noise Floor and Reduction until the gaps are quiet and the voice still sounds like the room you want.

Noise reduction is two jobs, not one

Background noise has a high half and a low half. The high, steady hiss of a mic, a fan or a room goes with Noise Removal. The low rumble of traffic, footsteps, desk knocks and handling noise sits under the voice, and it goes with a low cut: the Filter effect's Low Cut, or Band 1 of the 8-Band EQ, a low shelf from 20 to 500 Hz. Put the low cut first and Noise Removal after it, so the cleanup works on less noise.

Recording in a video? The same steps start after one right-click: remove background noise from video covers Separate Audio and an MP4 export with the picture. Using Audacity today? Removing background noise in Audacity shows its noise-profile method next to Veena's, which needs no profile.

Keep the voice, lose the room

When the noise is not a hiss but other sound, such as music playing behind you, a crowd or a TV, a noise reducer is the wrong tool. Split the recording instead. Right-click the clip and choose Separate into Stems: the voice lands on its own vocals stem, time-aligned with the rest. The free vocal isolator walks through it, and Noise Removal on the vocal stem takes off whatever hiss is left. Once the vocal is clean, the 8-Band EQ shapes its tone.

Free noise reducer: how Veena compares

VeenaA noise remover websiteA desktop audio editor
FreeYesUsually, with limitsOften
Runs in the browser, phones includedYesYesNo
Presets for the kind of noiseFive, by nameRarelyVaries
Hear before and after on one knobYes, AmountRarelyPreview only
The cleanup stays editableYes, it is a track effectNo, you get a new fileOften not
Split a voice from music behind itYes, Separate into StemsVariesRarely
Build a song on the clean takeYes, with CoProducerNoNo

A noise remover website does one thing in one click, and for a single file you never plan to touch again that is quick. When the recording is your own music or your own voice, Veena is the better noise reducer, because the cleanup stays editable and the clean take becomes the first track of a song. Clean up your first recording free now.

Related reading: Remove background noise from video · Free vocal isolator · Remove background noise in Audacity · Use effects in Veena

Try this in Veena

Make an original 84 BPM acoustic folk song in D major with fingerpicked acoustic guitar, soft piano chords, a warm upright bass and brushed drums. Then clean the guitar track: add Noise Removal to its FX with the Gentle Hiss preset, and cut below 80 Hz with Band 1 of an 8-Band EQ so no rumble sits under the song.

Open Veena free

Opens a new project in Veena, and CoProducer starts building from this prompt.

Frequently asked questions

How do I remove background noise from audio for free?

Open daw.veena.studio, sign in with Google and drop your recording onto the timeline. Open the track's FX, add Noise Removal and pick a preset: Gentle Hiss, Room Tone, Noisy Preamp, Heavy Hiss or Safety Net. Set Noise Floor just above the hiss between words, then export WAV or MP3. Veena does it free in your browser, with no watermark.

What is the best free noise reducer online?

Veena is an AI DAW with a personal music producer built in. Describe the song you want and CoProducer builds it with you — beats, chords, melody, arrangement and mix — as real tracks you can edit, mix and export. Free, in your browser. Its Noise Removal effect clears hiss, room tone and preamp noise from your own recordings, with five presets to start from.

Will noise reduction make my voice sound worse?

Not when it is set by ear. In Veena, set Noise Floor just above the hiss you hear between words and keep Reduction around 12 to 18 dB, where the result sounds natural. Turn Amount to 0 to hear the untouched take, then back up, so you always keep the cleanest version that still sounds like your voice.

Can I clean up a phone voice memo?

Yes. Veena imports M4A, so an iPhone voice memo drops straight onto the timeline, along with WAV, MP3, FLAC, AIFF, OGG and more. Add Noise Removal to its track, try the Room Tone preset for a quiet room or Heavy Hiss for a noisy one, and export the clean take. It works in the browser on your phone as well as your computer.

Can I remove background noise from a podcast or voice-over?

Yes. Put each voice on its own track in Veena and add Noise Removal to each one, so a quiet speaker and a loud speaker get their own settings. Cut low rumble with the Filter's Low Cut or Band 1 of the 8-Band EQ, then export a WAV for your editor or a 320 kbps MP3 to publish, free.

What if the noise is music or crowd sound behind the voice?

That is a job for the stem splitter, not a noise reducer. In Veena, right-click the clip and choose Separate into Stems: the voice lands on its own vocals stem, time-aligned with the rest, so you keep the voice and lose the room. Then add Noise Removal to the vocal stem for any hiss left behind.

Meet your personal music producer

Free, in your browser. Describe the song you want and CoProducer builds it with you.

Make music free