What is Sonarworks SoundID Reference?

Published By Veena Studio

SoundID Reference is Sonarworks' calibration software: it corrects what your speakers and headphones add to the sound, so you mix what is really there. It runs as a standalone app that calibrates your whole computer and as a plug-in for your DAW, and its three editions start at €99, half that this Black Friday. The mix it helps you trust can be made in Veena's free studio in your browser, with CoProducer building the song alongside you.

Veena is an AI DAW with a personal music producer built in. Describe the song you want and CoProducer builds it with you — beats, chords, melody, arrangement and mix — as real tracks you can edit, mix and export. Free, in your browser.

What SoundID Reference does, in Sonarworks' words

Read on sonarworks.com and Sonarworks' support pages on 19 November 2026:

  • What it is: "a standalone app and a DAW plugin that calibrates speakers and headphones to deliver an accurate studio reference sound."
  • Speakers: it measures "the frequency response of your room and speakers to create a calibration profile", from stereo up to 9.1.6 Atmos rooms, with a measurement microphone.
  • Headphones: "simply apply a pre-made calibration profile available in the software", for "over 500+ supported headphone models".
  • Two ways to run: a DAW plug-in, installed as VST, VST3, AU and AAX, and "a standalone Systemwide app calibrating audio across your entire system".
  • Extras: a translation check that simulates "a car stereo to a high-end hi-fi system", custom target curves, and zero latency, mixed or linear phase filter modes.
  • Computers: macOS 11 Big Sur to 26 Tahoe and Windows 10 and 11, online; "offline installation is not supported".

SoundID Reference editions and prices

EditionWhat it calibratesRegular priceBlack Friday, to 30 Nov 2026
For HeadphonesOver 500 headphone models€99€49
For Speakers & HeadphonesStereo speakers, with or without a sub, plus headphones€249€149
For Speakers & Headphones with Measurement MicrophoneThe same, with Sonarworks' microphone€299€179
For MultichannelUp to 16 channels, to 9.1.6€499€299

Prices are in euros as sonarworks.com showed them on 19 November 2026; its pricing link opens the Black Friday page. The trial is 21 days, fully functional, with no card. Every edition and upgrade on sale is on does Sonarworks go on sale for Black Friday.

SoundID Reference and Veena

Read 19 Nov 2026VeenaSoundID Reference
What it isThe studio and the producer: make, mix, master and export the songCalibration for the speakers and headphones you mix on
PriceFreeFrom €99; €49 this Black Friday
Builds the song with youYes, CoProducer writes beats, chords, melody, arrangement and mixNo
Mixing and masteringAutoMix and Master project, freeCorrects what you hear while you mix
Runs onAny current browser, and on your phoneMac and Windows
Works togetherSoundID's VST3 or AU plug-in on Master FX through Veena Bridge, or Systemwide in front of the browserYes

Calibrating a room is SoundID Reference's strength, and it is not something a DAW does. Veena is the rest of the studio at $0: the tracks, the producer, the mix and the master. Together, that is a calibrated headphone mix for €49 this week, SoundID's headphone edition, with the studio at nothing.

Master FX in Veena, where SoundID Reference's plug-in sits last in the chain

Mix your first calibrated song in Veena

  1. Install SoundID Reference from sonarworks.com, the trial or your licence, and load your headphone profile.
  2. Turn on Systemwide, so everything your computer plays, the browser included, is calibrated.
  3. Open Veena at daw.veena.studio and paste the lo-fi prompt below; CoProducer builds the beat as real tracks.
  4. Open Mix & Master, press AutoMix, then Master project, and fine-tune by ear on your calibrated headphones.
  5. Export WAV, MP3, MIDI or stems, free. Systemwide sits after Veena, so the export carries your mix, not the calibration.

How the plug-in route works inside the studio is on does SoundID Reference work in a browser DAW.

Make a 92 BPM lo-fi hip hop beat in A minor for mixing on calibrated headphones: a dusty swung kick and snare, a soft shaker, a round sub bass on A, warm Rhodes chords on Am9, Dm9, Fmaj7 and E7 with tape wobble, and a mellow guitar lick in the hook. Intro 4 bars, verse 16, hook 8, verse 16, hook 8, outro 4. Then mix it with the kick and bass clear in the low end and master it for streaming.

Related reading: Veena help centre · Does Sonarworks go on sale for Black Friday? · Does SoundID Reference work in a browser DAW? · Mix & Master in Veena · How do I master a song for free? · VST and AU plugins in Veena · Black Friday DAW deals 2026

Try this in Veena

Make a 92 BPM lo-fi hip hop beat in A minor for mixing on calibrated headphones: a dusty swung kick and snare, a soft shaker, a round sub bass on A, warm Rhodes chords on Am9, Dm9, Fmaj7 and E7 with tape wobble, and a mellow guitar lick in the hook. Intro 4 bars, verse 16, hook 8, verse 16, hook 8, outro 4. Then mix it with the kick and bass clear in the low end and master it for streaming.

Open Veena free

Opens a new project in Veena, and CoProducer starts building from this prompt.

Frequently asked questions

What is SoundID Reference?

SoundID Reference is Sonarworks' calibration software for speakers and headphones. Sonarworks calls it "a standalone app and a DAW plugin that calibrates speakers and headphones to deliver an accurate studio reference sound" (sonarworks.com, read 19 November 2026). Veena is an AI DAW with a personal music producer built in. Describe the song you want and CoProducer builds it with you — beats, chords, melody, arrangement and mix — as real tracks you can edit, mix and export. Free, in your browser.

How much is SoundID Reference?

Sonarworks listed three editions on 19 November 2026, in euros: For Headphones €99, For Speakers & Headphones €249 (€299 with the measurement microphone) and For Multichannel €499. Its Black Friday prices until 30 November are €49, €149, €179 and €299. Veena's studio, where you make and mix the song you are calibrating for, costs nothing.

What does SoundID Reference actually do?

For speakers, it measures the frequency response of your room and speakers with a microphone and builds a calibration profile; for headphones, you load a ready-made profile for your model from a list of over 500 (sonarworks.com, read 19 November 2026). With the profile on, you hear a flat reference, so a mix made in Veena translates to phones, cars and earbuds.

Does SoundID Reference work as a plug-in?

Yes. Sonarworks' installer adds VST, VST3, AU and AAX plug-ins plus the standalone Systemwide app, which calibrates everything your computer plays (Sonarworks support, read 19 November 2026). The VST3 and AU plug-ins load in Veena through Veena Bridge, and Systemwide calibrates Veena in your browser with no plug-in at all.

Is there a free trial of SoundID Reference?

Yes. Sonarworks offers a "fully functional 21-day free trial" with "no credit card required", on Mac and Windows (sonarworks.com, read 19 November 2026). Install it, open Veena at daw.veena.studio and mix the song CoProducer builds on your calibrated headphones before you decide.

Do I need SoundID Reference to mix a song?

No. Veena's free Mix & Master sets your parts, cleans vocals, runs AutoMix and masters the song with editable Match EQ and Limiter cards, on any headphones. SoundID Reference adds an accurate picture of what those headphones or speakers are hiding, so it makes every mixing decision you take in Veena easier to trust.

Meet your personal music producer

Free, in your browser. Describe the song you want and CoProducer builds it with you.

Make music free